The simulation labs have been very busy this month with Nursing, Social Work, Physical Therapy, Integrated Health Sciences, Nurse Anesthesia and Physician Assistant students all learning and practicing a variety of skills. CSP also hosted a very fun and successful Open House, inviting UNE faculty, staff and students to meet the newest member of our mannequin family (3G), tour our sim spaces and learn what goes on in the clinical simulation labs. The pictures below tell the story…
Aaaaaand…we’re back! After a summer full of fun and rest, our academic year has begun. Welcome to new students and faculty; welcome back to our good ol’ friends.
The lab’s time this summer was split up between simulation sessions, special projects and reorganizing. First-year Physician Assistant students were fortunate to be the first program to use our new SimMan 3G. Cynthia and I brought him to the Alexander 07 lab for several assessment sessions. We focused on pulses, eyes and auscultation (listening to heart, lung and belly sounds). The students were fabulously fun to work with: so great, in fact, that I let them name the new simulator. Say hello to Gene and the students who named him:
MSNA students came to lab for their capstone simulation experience: Crisis Resource Management (CRM). They participated in several intense operating room scenarios with our METI simulator. Each student gets their turn putting METI to sleep and adapting to a variety of emergencies. These scenarios always stand out for me because the MSNA faculty put forth a lot of energy into creating a realistic case: the lab is filled with multiple actors and lots of equipment. It was great to have them come to lab.
Amongst cleaning and organizing our many rooms, two projects came to fruition: doors and air! Our two original simulation rooms (Blewett 116 and 117) now connect directly into our debriefing room (Blewett 107). This will keep the learning environment contiguous and allow students to share their initial reactions to a scenario. Additionally, it will allow equipment to be easily moved between rooms (the doors are extra wide). The benefit for me, however, is that I can now see sunlight in my office.
Though, it goes through three windows and has to travel 100 feet.
So it’s not that bright.
Still, I can see trees!
As for the air project, Facilities was kind enough to set up an air compressor in the basement that feeds to the gas room. Our two METI simulators suck up a lot of air when they are running. For the past 7 years, the lab has been paying to rent and lease canisters to provide this air. But now we get it for free! Yippee!
Finally, in the first week of August, I was lucky enough to travel to Las Vegas for the first annual Gathering of Technicians (GOT), a conference focused on the technical side of all things simulation. The conference was hosted by the University of Nevada – Las Vegas (UNLV) and their entire staff was absolutely delightful. The facility at UNLV is fantastic and, thankfully, air conditioned.
We had two very full days of workshops and lectures. Topics included moulage (the “making up” of wounds and physical props), video technology and vendor-specific training. My favorite session, though, was the talk by Captain Steven Wilkinson. A former airline pilot trainer, the Captain taught us a few lessons about how simulation came about in the airline industry. The success of making simulation a natural part of a pilot’s training and continued certification, is an inspiration to me. Medical simulation will most likely follow the same route, where standards are set for simulated work time before board certification and during one’s career. It’s very exciting to think about the places we will be going!
Here’s to another exciting year at UNE CSP! See you soon!
The month of May marked the end of our 2010-2011 calendar year and we have had a busy year. The simulation labs were utilized for many learning opportunities. In this supportive atmosphere, students and faculty were able to focus on both discipline specific skill development and interdisciplinary professional competencies. We have seen two thousand two hundred and forty-nine learners experiencing a variety of simulation activities during six hundred and seventy-six lab hours.
Students from most all of our health professions departments spent time with us in April and May, including: Physical Therapy students and Nursing students, highlighted below.
Physical Therapy students were welcomed back in to the simulation labs this spring. As part of their Physical Therapy Management of Adults with Disorders of the Neuromuscular System class, the students had the opportunity to conduct a physical therapy treatment session for a patient with a traumatic brain injury (TBI). The patient’s behavior (agitation, confusion, lethargy etc) was the focus of the session.
Nursing students ended their busy year in the simulation labs practicing their medical surgical, psychiatric, pediatric, teaching and maternity nursing skills.
Our senior nursing students were a bit sentimental as they commented on their last sim experience before graduating from UNE.
- Experience was wonderful!
- Always a pleasure, allows us to put our brains to work.
- I love Sim!!
- Bye bye sim, it’s been swell I will miss you.
- I love sim lab! Sad it’s the last one!
It is always hard to say good-bye to our graduating students but it was fun to say “Hello!” to our new high fidelity wireless simulator, Laerdal’s SimMan 3G. Ryan wasted no time unpacking our new mannequin and has already put in many hours discovering how easy 3G is to operate. We are happily imagining the variety of new environments and patient cases that will be available to us as we integrate our newest member of our mannequin family into our simulation learning experiences.
That’s all for now, but we’ll be back with another update in July. Happy summer to all.
…Of Oz! Get it? “The man behind the curtain!”
Anywho, this month’s tech-focused blog post deals with four little pieces that have been of note during the month of April. Enjoy!
An exciting little project: removal of a METI HPS head. The HPS being used in our simulated operating room has a very messed up face: a tear from the corner of his mouth, some stains and lots of general grime. While it is still under warranty (just a few more weeks…no renewal possible for this old unit), I decided to get his face replaced. This requires a trip to Sarasota, FL and some tender care from METI Customer Support.
While I was a little apprehensive before starting the task, it turned out to be fairly simple. All the tubes have quick-release connections and are clearly labeled at both ends: esophagus, bronchi, eye control, etc. The only trick was disconnecting his spine: I got a tip from METI’s Ben Walker to detach the spine at the base of the skull, not the neck. I did need to hunt around campus for the correct size allen wrench; thanks a bunch to Elaine and the good folks in ITS. Then, with time and patience (the close quarters only allow for about 120 degrees rotation before you have to reseat the wrench), I was able to perform a successful Mortal Kombat finishing move. Get Over Here!
One of the joys of being the technical head of the simulation program here at UNE is the opportunity to reassess our operations and then go about refining our lab’s systems. For the past year, I have felt frustration with the layout of the control rooms; in particular, the control room that doubles as my office.
The difficulty comes with the multi-function nature of the space: sometimes it is just an office where I program, cut video and eat lunch; other times it is chock full of people running a scenario (myself, faculty, actors, etc). When being shared by multiple people, we are constantly getting in each others’ way: a beverage blocks the mouse I need to use, I have to squeeze past someone to get a microphone, everyone’s backpacks/purses are tripped over. So I wanted to figure out a way to consolidate my systems and create a separation of “tech space” and “guest space.”
Luckily I had the time to rearrange my multiple computer systems and the money to purchase a wall mount for a monitor. By moving stuff up and over, I was able to make my technician space and a public space clearly defined. Now, bags can go under the desktop or on the hooks mounted on the wall and faculty notes can be organized on top.
For UNE’s Annual Spring Symposium, CSP was called on to help create and record several video vignettes relating to veterans’ health issues. One of the vignettes focused on a soldier with an IED-related arm injury. Cynthia and I needed to doctor the actor’s arm up for the videotaping, but did not want to spend a long time on the project. We chose to use a Laerdal rubber burn skin:
Intended for use on our SimMan, this piece easily slipped onto the actor’s hand. We then wrapped the rubber hand and the actor’s forearm in gauze, securing everything in place and adding that clinical touch. Here it is in action:
Lastly, exciting news! We received approval to purchase SimMan 3G a month or so ago (which I believe Cynthia mentioned previously on these pages) but we have now learned that he is on his way! While offering all the features of our current SimMan, 3G has several unique additions, the most obvious being his lack of wires…we get to go mobile with our adult simulation scenarios. 3G also brings a simple, quick to set up fluid system to our program: he’ll bleed, cry, foam at the mouth and sweat at the drop of a hat. Look for an upcoming announcement of Mr. 3G’s welcoming party!
That’s all from the desk of the Wizard!
March has come to an end and it’s time to submit another update on the activity here in the clinical simulation labs. Every day of this past month, except during spring break, we had students learning in our sim spaces. Here are a few highlights:
This month we welcomed newcomers from the School of Pharmacy. Ninety-seven students practiced their respiratory assessment skills to rave reviews. “Great experience to provide us with an idea of a real clinical setting and the possible role of the pharmacist.” “This was a great learning experience. I was very impressed by the facilities and the quality of the artificial environment.”
Not newcomers to simulation, but here for the first time this year, Occupational Therapy students returned to the simulation labs to demonstrate their skills for evaluating instructors. At one point, all four of simulation theaters were occupied as student pairs took turns playing the role of the therapist or the client. Each session was captured and uploaded to our sim server. Students can access the recorded sessions to review.
Actors and faculty gathered in the simulation labs for the filming of vignettes that will be shown at breakout sessions during Spring Symposium on April 7th. Three brief scenes were filmed and edited by Ryan. Physician Assistant, Occupational Therapy, Nursing and Social Work faculty collaborated with actors from Adverb Productions to create compelling case studies for symposium participants to discuss.
Shelley Cohen Konrad has developed unfolding case studies for her social work students and this month brought the return of the actors to their roles of the pervious month. The students have been working with the same “clients” throughout the semester and have used their therapeutic skills to provide counseling and emotional support for this couple in crisis.
Cynthia and Dawne-Marie Dunbar were honored to be chosen to participate in the Health Information Technology Scholars (HITS) program which is a faculty development collaborative partially funded by the Health Resources and Services Administration (HERSA). The focus of the program is to expand integration of technology into the nursing curriculum. Cynthia and Dawne-Marie have developed a technology project, completed a series of online modules and recently went to Johns Hopkins to attend a workshop designed to provide an opportunity for HITS scholars from across the country to collaborate on technology projects.
Nursing students from our Adult Medical Surgical clinical groups and specialty nursing courses (Maternity, Pediatrics and Psych) have continued to clock many hours with SimMan, Simbaby, Pediatric Hal and our volunteer actors.
What do you do if the power goes out during a surgical procedure? MSNA students had a chance to experience this occurrence during their weekly practice sessions and open labs offered throughout the month. “This experience gave me a feel for the OR and the flow of events during induction, emergence and power failure” “I think the sim lab was extremely helpful in preparing all of us for real life situations.”